On the left is the outcome of my first draft. On the right side is the result of my finalized pattern for a 12" tall doll.
There is no doubt about her gender in spite of her lack of breasts. I figure at some point during the rounds she will acquire a set along with a lot of other interesting and decorative goodies.I've come up with a different method for working with this pattern from the way I instructed making the bird. Both patterns are transferred to a wax backed freezer paper. The cut edges of the doll pattern pieces are the seamline.
I use a light box to position the freezer paper pattern over the area I like on the wrong side of the fabric. After the pattern is ironed to the fabric rough cut at least a 1/2" allowance around the pattern. I again use the light box to position the pattern with the ironed on fabric to a "good" spot on the right side of the fabric. Then again rough cut the fabric at least a 1/2" from the paper edge. It's very easy to sew the seam at the edge of the pattern with an open toe foot. I shorten the stitch length to "2" on my Pfaff machine. The seam is stitched all around the pattern piece (do not leave an opening for turning). Trim close to the pattern with pinking shears.
If you don't have pinking shears, it is necessary to clip into the seam at the curves so they will be smooth when turned inside out. The sharp inwardly curved seam between her feet needs to be clipped that way.
To turn the body inside out I drew a 2" long line in the middle of her back to cut an opening.
Using tweezers is helpful to grasp narrow ends to pull them through the body and out the cut opening. After the body is turned right side out draw a 5" long line from the toes upward to give her two legs. Stitch a seam along the line being sure to secure the thread ends.
The arms are cut and sewn the same way ... a closed seam around the pattern. The slit for turning is made at the top in the area that will be sewn next to the body.
The pattern for the head is laid out on the fabric and sewn in the same manner. Leave an opening in the seam at the chin for the neck on the body shape to fit into. Cut excess fabric in the shape of a neck at the opening. The dotted line represents the placement of the stuffed neck when the head is attached to the body.
Turn all the body pieces right side out. Use a fiber-fill to stuff the arms, head, and body. The opening of the back is closed with the ladder stitch. Take a running stitch on alternate sides of the opening. A number of stitches may be made before drawing the seam shut.
Sew the arms in position with a ladder stitch seam from the center of the front up over the shoulder to the center of the back. This allows mobile arm movement.Tuck the excess "neck" fabric inside the opening of the head. Position the head over the stuffed neck on the body. It's a bit fiddly. Use the needle to help stuff and smooth the loose fabric.
Use the ladder stitch to attach the head to the body. I stitched the backside first, then added more stuffing to puff out the face before stitching the front closed.
And that's how to make a spirit doll. She's ready to be decorated and embellished however her maker wishes to portray her persona. I'm looking forward to my friends each adding their unique touch to my doll ... bits of their creative spirit.
The pattern and these instructions can be downloaded to your computer and printed out... just like for the bird.
No comments:
Post a Comment