For this Smoky Mountain series I decided to keep the composition small (9"x 9"). To give the pieces substance as well as to emphasize the distance of the furthermost mountains they are framed with 2" wide borders.
Sugarlands Overlook (14"x 14")These borders are created by laying and couching yarns as well as adding decorative machine stitches to a foundation of fabric. All four borders are constructed in one piece. The surface foundation fabric is layered with batting and a backing fabric. I use a spray adhesive to adhere those three layers so they don't shift while doing all the machine work that lies ahead.
Also apply a spritz of spray adhesive to the top surface of the foundation fabric. Make a selection of decorative yarns that complement the composition. I chose two variegated chenille yarns plus one that is twisted with a finer thread and a decorative rayon one. Cut lengths and arrange them on top of the foundation.
Select a tulle netting that complements your choices and the composition for which the border is being created. I used black. Spritz a layer of adhesive to the underside of the tulle before carefully laying it in place. Pin baste all the layers together.
Machine stitch around the outside edges to secure the yarn ends. Run straight rows of stitching parallel to and between the rows of yarns.
I had used a metalic copper thread for that first set of stitches.
And then I couched rows of this twisted fiber yarn across the piece.
To read the tutorial about the method I use for couching yarn go
here. Scroll to the middle of that post for the instructions to couch yarn on a surface. The first part is about couching yarn to raw edges.
This is the result of couching that variegated twisted linen type yarn.
My last step was to fill in any spaces with rows of a narrow zig-zag pattern using a #40 quilting thread.
When you are satisfied with the amount of stitching trim one ragged edge from the layered border fabric. Measuring from this clean edge cut the fabric into four borders. For this small composition each of the borders are the same width. On some of my larger quilts the bottom border has been cut wider than the other three.
Do not cut any length away from the borders. Align the edge of a border with the edge of the quilt. Apply scotch tape to keep the pieces together. Turn it right side up and stitch the two together with a wide zig-zag stitch.
Apply the border on the opposite side of the quilt. Then zig-zag stitch the other two borders just to the sides of the quilt. All the corners will be overlapped and hanging loose.
My preference is to miter the corners of these borders. Although, they certainly could be finished otherwise. Use an acrylic ruler to draw the angle between the corner of the quilt and where the edge of two borders meet. For equal width borders this will be 45 degree line. It will be a different angle for two borders that are different widths. Cut along this line through both layers. It's easier to cut one layer and then draw on and cut the other. Tape and zig-zag stitch the miter closed.
To finish the raw seam between the borders and the quilt I cover it with a flat decorative yarn. It is zig-zag stitched in place by machine. Do this before applying decorative yarns to those same seams on the front of the quilt.
Here's a close-up photo of the decorative yarns that finish the front side of the quilt. Use the first method described in my
tutorial for couching yarns to apply it to the outside edge. Sometimes I cover the mitered corner seams with yarn. Doing so will draw attention to that detail. Omit that step if doesn't work for your quilt.
Here are links to other quilts that feature my layered fabric borders:
Sugarlands Overlook (14"x 14")
Also apply a spritz of spray adhesive to the top surface of the foundation fabric. Make a selection of decorative yarns that complement the composition. I chose two variegated chenille yarns plus one that is twisted with a finer thread and a decorative rayon one. Cut lengths and arrange them on top of the foundation.
Select a tulle netting that complements your choices and the composition for which the border is being created. I used black. Spritz a layer of adhesive to the underside of the tulle before carefully laying it in place. Pin baste all the layers together.
Machine stitch around the outside edges to secure the yarn ends. Run straight rows of stitching parallel to and between the rows of yarns.
I had used a metalic copper thread for that first set of stitches.
And then I couched rows of this twisted fiber yarn across the piece.
To read the tutorial about the method I use for couching yarn go here. Scroll to the middle of that post for the instructions to couch yarn on a surface. The first part is about couching yarn to raw edges.
This is the result of couching that variegated twisted linen type yarn.
My last step was to fill in any spaces with rows of a narrow zig-zag pattern using a #40 quilting thread.
When you are satisfied with the amount of stitching trim one ragged edge from the layered border fabric. Measuring from this clean edge cut the fabric into four borders. For this small composition each of the borders are the same width. On some of my larger quilts the bottom border has been cut wider than the other three.
Do not cut any length away from the borders. Align the edge of a border with the edge of the quilt. Apply scotch tape to keep the pieces together. Turn it right side up and stitch the two together with a wide zig-zag stitch.
Apply the border on the opposite side of the quilt. Then zig-zag stitch the other two borders just to the sides of the quilt. All the corners will be overlapped and hanging loose.
My preference is to miter the corners of these borders. Although, they certainly could be finished otherwise. Use an acrylic ruler to draw the angle between the corner of the quilt and where the edge of two borders meet. For equal width borders this will be 45 degree line. It will be a different angle for two borders that are different widths. Cut along this line through both layers. It's easier to cut one layer and then draw on and cut the other. Tape and zig-zag stitch the miter closed.
To finish the raw seam between the borders and the quilt I cover it with a flat decorative yarn. It is zig-zag stitched in place by machine. Do this before applying decorative yarns to those same seams on the front of the quilt.
Here's a close-up photo of the decorative yarns that finish the front side of the quilt. Use the first method described in my tutorial for couching yarns to apply it to the outside edge. Sometimes I cover the mitered corner seams with yarn. Doing so will draw attention to that detail. Omit that step if doesn't work for your quilt.
Here are links to other quilts that feature my layered fabric borders:
I couldn't wait to get out of bed this morning to play with that pile "stuff". I separated out wonderfully dyed bits of fabric for fall trees in the maybe Smoky Mountain series, some pieces went into the Lake series bag, and I pulled "stuff" for this idea.
A few choice pieces are laid out on a background of heavy upholstery brocade (a gift from another friend) that is pieced together alternating sides (front/back). For quite some time I've been tempted to create a "slow piece" ala Jude of Spirit Cloth. This just may be that project. It would be a fun challenge to incorporate that bright blue cotton crocheted medallion.
This piece has been hanging in my studio for over a month without having an idea of what my next contribution should be. Come to think of it, there are some of Deb's bits and pieces incorporated in my first round of this project. Go here to read about the last round robin project Katrina and I created.
